Hook Mount Manual (Budgit)

Push/Pull and Hand Geared Trolleys

Overview

Trolleys provide a mounting for hoists and are a quick and easy way to lift and transport materials from place to place. Trolleys require little effort to traverse even when loaded to capacity.

Specifications

Capacities from 1/4 to 5 ton (metric rated).

Trolley sides are of all-steel construction for maximum strength

Wheels are steel with hardened treads and roller bearings for
easy traversing and long life

Self aligning frames keep the load equally distributed, and are
adjustable to fit several sizes of beams

Wrap-around side plates provide built in drop stops to increase
operator safety and act as a bumper to protect wheels

Push trolleys are an economical alternative for low duty cycle,
lighter capacity applications with lifts under 20 feet

Hand geared trolleys are designed for applications requiring
close control of horizontal movement of the hoist and its load

Hand geared trolleys are deal for those applications where an
operator shouldn’t be near or touch the load to move or
position it

Features

Frames: Deeply embossed steel sideplates on the 1/4 through 2 ton models provide a high strength to weight ration. Sideplates are of wraparound design providing a full face bumper as well as a protective lug which will prevent trolley from falling off I-beam in event of inadvertent wheel axle failure. The 3 ton trolley sideplate frames are thick rolled steel sections with added bumpers.

Wheels: High-quality pressed steel wheels, carburized and hardened to ensure long life, are offered on the standard trolleys. Spark resistant models have beryllium copper wheels. The wheels have built-in ball bearings to provide smooth easy rolling motion and compound tread design to make them suitable for operation on wide flange beams as well as American Standard I-beam tapered flange beams. Deep flanges help prevent wheels from climbing the track.

Cross Pin: The cross pin connects the sideplates and provides equalized wheel loads. It has a center located hood saddle groove designed for mounting hook suspended hoists...permitting the closest possible headroom. Each trolley is easily adjustable to fit several sizes of beams by simply shifting cross pin spacer washers from inside to outside of trolley sideplate.

Hook Mount Manual (Kito)

Industrial Quality Built For Long Life

Overview

Whether plain or geared, there’s a trolley to fit every KITO hoist. The reliability, smoothness of operation, and safety of your hoist is dependent on the trolley. Be sure to choose KITO quality and safety for both the hoist and trolley.

Features

Capacity: ½ to 20 tonne. Choose the capacity that meets your needs.

- At rated capacity, load-bearing parts are only stressed to 20% of their limit

- Heat treated steel wheels are hardened for long, trouble-free life

- Lifetime lubricated ball bearings increase reliability and reduce maintenance

- Adjustable to fit any beam–tapered or flat flanged, easily adapted for your shop or plant

- Low minimum radius for curved beams for smooth travel around tight curves

- Safety Lugs as standard

Rigid Mount Manual (Budgit)

Designed Especially For Use With Lug Suspended Hoists

Overview

These Rigid Mount Trolleys are designed especially for use with lug suspended hoists. The trolleys attach directly to lug brackets on hoists, thereby forming integral trolley-hoist combinations, offering close headroom dimensions-making the trolley-hoist ideal for hoisting applications where distance from floor to I-beam is limited.

The trolleys are of all steel construction to provide maximum strength. Wheels have hardened treads, insuring long life, and operate on ball bearings for easy travel.

On hand geared models, the hand chain operated wheel turns a pinion which meshes with wheel gears for ease of operation and accurate spotting. The chain guide keeps the chain aligned with the wheel and helps prevent fouling. The wheel gears and drive pinion have machine cut teeth. Anti-tilt rollers are provided on hand geared trolleys, as well as the 1-ton push type for extended hand chain wheel hoist, to eliminate tilting of trolley on beam when operating with light load or without load.

Specifications

Capacities: 1/4 to 6 ton

Designed especially for use with lug suspended BEHC, 6000 Series, 2200 Series and USA Models.

Ideal for low head room applications where distance from floor to I-beam is limited.

Trolley side plates are of all-steel construction providing maximum strength.

Wheels have hardened dual treads ensuring long life and operate on ball bearings for easy travel. Pressure fittings are provided in wheel axels to simplify lubrication.

Dual treads allow trolley to run on both I-beam and width flange
type beam applications. Optional patented type wheels available for patented track systems.

Rigid Mount Motor Driven (Budgit)

Overview

Motorized trolleys increase efficiencies in operations and are easily controled by pendant or radio controls.

Specifications

- Capacities: 1/4 to 3 ton.
- Standard width adjustment.
- Optional speeds available.

Features

- Steel frame side plates extend beyond the wheels for end stop contacts. Side plates have tapped holes for collector bracket attachment. Optional safety drop
stops and bumpers.

- Wheels are forged heat-treated steel with contour tread for use on American Standard I-beam or wide
flange beams.

- Traverse motor is 30-minute rated, totally enclosed non-ventilated with class “F” insulation and TAS as standard.

- Traverse gearing is housed in a heavy duty right angle drive reducer with output pinion meshing with machine cut wheel gears.

- Trolley controls are housed in a NEMA 1 enclosed panel mounted on the trolley side for easy access. The controls include a reversing contractor, terminal strip and NEMA 4X pendant station with hoist and trolley push-button controls as standard.

Rigid Mount Motor Driven (Kito)

MR2 Series Electric Motorized Trolley

Overview

There’s a trolley to fit every KITO hoist. The reliability, smoothness of operation, and safety of your hoist is dependent on the trolley. Be sure to choose KITO quality and safety for both the hoist and trolley. Motor driven trolleys can be either pendant or radio controlled.

Specifications

Capacities: 1 to 20 metric tonnes
3 Phase
Heavy Duty

Features

- Single Speed Trolleys from 1 to 20 tonne capacity allows you to choose the capacity
that meets your needs

- 5 tonne, for improved efficiency

- Adjustable 2-Speed Trolleys (220/440V) featuring a Variable Frequency Drive
(VFD) for improved load control

- Heat treated steel wheels are hardened for long, trouble-free life

- Lifetime lubricated ball bearings increase reliability and reduce maintenance

- Adjustable to fit any beam – tapered or flat flanged, easily adapted for your shop or
plant

- Safety Lugs as standard