Hoist Air Driven - Aro 7740B

Capacities: up to 300 pounds

Specifications

Lift: 10 feet standard (longer lifts can be specified)
Lift Speed: variable
Air Pressure: 28 scfm

Suspension

Hook or lug

Features

Link Chain
Rotary vane air motor
Self-adjusting brake
May be operated between 60 and 100 psi
Pull chain control
Steel snap hooks

Hoist Air Driven - Budgit Series 2200

Capacities 1/4 to 1 ton

Specifications

Lift: 10' standard (other lifts available
Lift Speeds: 48 SCFM at 90 PSI
Control: Pendant Throttle, Pendant Control Hose - 6 foot length is standard. Longer lengths are an optional extra up to 72 feet available.

Suspension

Hook or lug

Features

Inlet air swivel with built-in strainer provides free hoist movement
Aluminum frame and end cover
Heavy duty shoe type brake
External adjustment screw for speed control
External brake adjustment
Limit stops

Hoist Air Driven - Budgit Series 6000

Capacities: 1, 2, and 3 ton

Specifications

Lift: 10 foot lifts standard. Additional lifts available
Air Pressure: 90 psi recommended
Control: Pendant Throttle

Suspension

Hook or lug

Features

Die-cast aluminum frame
Precision cut gearing
Mechanical load brake
Overload protection
Multi-vane rotary air motor
Internal muffler
Throttle valve

Hoist Air Driven - Kito TCR

Capacities: 1/4 to 25 tonne

Specifications

Lift: 10 foot standard (Others available)
Lift Speed: variable
Air Pressure: 90 psi

Suspension

Hook or lug

Features

Abrasion resistant load chain
Forged carbon steel hook
Self adjusting brake
Built-in load limiter
Upper and lower limit switch
Weather resistant construction
Fine feathering movement control
External muffler
Multi-vane motor with filter lubricator

Options

Pendant or cord control
Chain bag
Custom lift lengths to suit application
Plain or geared trolley mount

Hoist Electric Chain - Budgit BEHC

Capacities: 1/4 to 3 tons

Specifications

Lift: 10 foot, longer lifts available
Lift Speeds: 5 to 64 fpm
AC Power: 115/230 1-60 Hz; Reconnectable; 230/460 3-60; Reconnectable 208 and 575 3-60 single voltage

Control

Push button control voltages of 115 volts standard on all 3 phase models, single speed, two speed and single phase models. 24 volt control optional.

Suspension

Hook, lug, plain, geared and motorized trolleys

Options

Load brake, weather proofing & waterproof covers, corrosion resistant, plating service, explosion proof div. 2, food service, spark resistant.

Hoist Electric Chain - Budgit BEHC-VFD

Electric Chain Hoist with Variable Speed Control with Single Speed Motor

Specifications

Minimizes high-starting current o motor which helps keep it cool extending life of motor and also permits increase in motor run-time and starts/stops over standard contactor control.
Electronic reversing, multispeed operation (up to 3 steps) eliminates conventional magnetic contactors which are wearable components

Voltages

380-460/3/60, 208-230/3/60 and 208-230/1/60

Standard

10:1 speed ratio permits precise positioning for load spotting
H4 duty rating
2-step infinitely variable push-button control standard. 3-step also available
Thermal overload protection
Fault recorder helps troubleshoot various problems such as power related issues.
3 programmable outputs

Hoist Electric Chain - CM LodeStar

Capacities: up to 3 ton

Specifications

Lift: 10 feet, longer lifts available
Lift Speeds: 5 - 64 fpm
AC Power: 115/230 1-60 Hz; 230/460-3-60

Control

Push button control pendant

Suspension

Hook, lug, plain, geared and motorized trolleys

Special Applications

Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications.

Hoists with climbing capability available for temporary rigging or lifting applications - must be used in inverted position only.

Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.

Hoist Electric Chain - CM Lodestar XL

Capacities: from 2 to 7 1/2 tons

Specifications

Lift:
Lift Speeds: max. 30 fpm

Control

Push Button Pendant

Suspension

Hook, Plain Trolley, Geared Trolley, Motor Driven Trolley

Hoist Electric Chain - CM ShopStar

Capacities: 300 to 600 pounds

Specifications

Lift: 10 to 20 feet
Lift Speeds: 8 to 16 fpm

Standard Features

Push Button Pendant
H3 duty cycle (150 motor starts/hour)
NEMA 12 industrial rated control station
Chain container
True Vertical Lift

Suspension

Hook

Options

Impact-resistant chain container

Hoist Electric Chain - Kito ER2

Capacities: 1/8 to 20 tons

Specifications

Lift: standard 10, 15, & 20 feet
Lift Speed: vary according to capacity
Power: 220/440/575V available (dependant on hoist)

Suspension

Hook, Plain Trolley, Geared Trolley

Features

- DC-current electromagnetic brake
- Thermal overload protection
- Slip clutch
- Upper/lower limit switch
- Push-button pendent with
- Standard e-stop button
- Durable load chain
- Forged carbon steel hooks
- Standard count hour meter
- Quick-connect plugs
- 110 volt pendent control

Options

- VFD for adjustable 2-speed operation
- Dual speed (575 volt) with mechanically interlocked electromagnetic contactors
- Ergonomic cylinder control
- Weston style mechanical brake
- Canvas chain bag
- Plastic chain container for ultra-low headroom applications
- Steel chain container for long-lift applications
- Custom lift lengths to suit your requirements

Hoist Electric Chain - Stahl ST

Capacities: from 125 to 5000 kg

Specifications

Lift: (4m) additional lifts available
Lift Speed: from 3.8 to 10 m/min depending on type and S.W.L.

Standard Features

Reduced headroom and overall dimensions
Powerful drive technology
Overall technical concept characterized by wear resistance and easy maintenance.

Suspension

Hook or Lug Suspension, trolley (push type, motor driven)

Options

Hoist limit switch
Geared limit switch
Motor temperature control
Design for special ambient conditions (e.g. Explosion protection)

Hoist Wire Rope - ShawBox 700 Series

Capacities: from 1 to 25 tons

Specifications

Range from .5 to 5 Tons (for 800 series)
Lift: 19 - 259 feet additional lifts available (for 700 series)
20 - 60 feet with additional lifts available (for 800 series)
Speed: 8 - 56 fpm (for 700 series)
8 - 48 fpm (for 800 series)

Suspension

Lug, Push Trolley, Hand Geared Trolley, Motor Driven Trolley, Deck and Base

Standard Features

One-piece welded steel frame
Deep grooved, large diameter rope drum
Block operated limit switch
Direct acting D.C. brake solenoid for smooth braking action
Full-swiveling, heat-treated forged steel hook with spring loaded latch
Improved plow steel pre-formed cable for maximum strength and life.

Options

Deck mounted hoists
Top running double girder trolleys
Air operated hoist
Explosion proof hoists
Spark resistant
Special application motors

Hoist Wire Rope - ShawBox World Series

Capacity: Up to 10 tons

Specifications

Lift: up to 45 feet
Speed: single and dual speed

Suspension

Self contained trolley mount

Standard Features

Hoist gear case and motor
Wire rope drum
Drum, reeving & lower
Block operated limit switch
Trolley traverse drive
Control panel

Options

Over capacity lift limit switch
Rope guide
Geared limit switch
Geared limit switch
Pendant station

Hoist Wire Rope - Stahl SH

Capacities: Up to 220,458 lbs. (100,000 kg.)

Specifications

Lift: 6 to 85.5 m (19.6 ft) depends on model type
Lift Speed: Single, dual and variable speed available

Suspension

Stationary or motor driven trolley

Standard Features

Rope guide
Brake protection
Motor protection
Tripping device with operating hour counter for overload and temperature control of hoist motor.
Gear-type limit switch
Trolley infinitely adjustable from 90-306 mm and from 400-500 mm flange width

Options

Low headroom and short approach for optimum utilization of space.
Travel limit switches
Overload protection
Safety drum brake
Variable hoisting and travel speeds

Hoist Wire Rope Trolley - ShawBox 700 Series

Capacities: from 5 to 25 tons

Specifications

Lift: to 75 feet
Designed for light to heavy applications

Standard Features

Compact, low profile design, steel frame, independent hoist motor and Weston type load brakes
Automatic limit switch prevents hook overtravel in either direction
Totally enclosed oil bath-lubricated trolley traverse drive
Precision-cut heat treated gears operate in enclosed oil bath for long life

Options

Special applications available
Power circuit limit switches
Variable Frequency controls
Flux vector control
Eddy current hoist control
Epoxy paint
Explosion proof
Air Powered

Hoist Wire Rope Trolley - ShawBox DMR

Capacities: 7 1/2 to 60 tons

Specifications

Lift: to 52 feet
Designed for medium to heavy applications

Standard Features

True Vertical Lift

Options

Special applications available
Variety of controls
Explosion proof
Air powered

Hoist Air Driven - CM Shop Star

Compact, powerful, and precise for assembly and manufacturing applications up to 1,000 pounds

Specifications

Capacities: 250 to 1,000 lbs.
Normal Operating Pressure: 90 psi (6.2 bar)
Air Consumption: 34 cu.feet/min
Lift: 6'-4"
Lift Speeds: (under full load)
-lifting: 11 - 31 fpm
-lowering: 38 - 83 fpm
(speeds vary according to model)
Maximum pendant drop 36 feet

Suspension

Hook Mount

Features

- Standard Protector™ overload device
- 10 pocket, oblique lay liftwheel provides longer chain life.
- Epoxy powder coat finish provides a durable exterior
- Durable reduction gearing means reliable operation
- Variable flow, two lever pendant for precise load spotting
- Threaded external exhaust for piping away exhaust in clean room or painting applications
- Small, compact design for commercial & industrial applications

Hoist Electric Chain - Kito SNER

Single Phase - Capacities: 1/4 to 3 metric tonne

Specifications

Capacity: 1/4 to 3 metric tonne
Lift: 10' standard (other lengths available)
Lift Speed: 3.5 to 17 ft/min.
Power: 115/220v
Mount: Hook, Plain Trolley, or Geared Trolley

Standard Features

- 60 minute, H4 rated, fan cooled motor for the most demanding applications.

- Ability to accommodate long lifts.

- Advanced fail-safe pull rotor brake is self-adjusting and virtually maintenance free.

- Compact, low headroom design for work in tight spaces.

- Standard upper limit switch protects the hoist from overlifting.

- Spur gears immersed in oil bath ensure quiet, smooth operation and long life.

- Unique chain guide design for smooth chain travel.

- Friction clutch protects the hoist against over travel and overload damage.

- 360° swivel bottom hook with built-in bearing, for easy positioning.

- Weather tight construction resists dust and water.

- Tested to 125% of rated capacity.

Options

- Chain bag to keep chain clean and out of the way.

- Custom lift lenghts to suit your requirements.

- Plain or Geared trolley mount for improved load control.

Pneumatic Control Handles Soft Touch

Easy Press Lever Design Reduces Fatigue

Low Cost and Easy to Use

Soft Touch Pneumatic Control Handles can be used with any air actuated end effector. These handles are a direct replacement for any standard pneumatic handles used in the market today.

Features and Benefits

— Engineered for easy use, reducing the potential for fatigue and repetitive stress injuries.

— Offers more flexibility in tooling choices and the ability to customize tooling for the application.

— Cost less than most comparable handles.

— Spool valve makes levers easy to press.

— Flexible configuration for any application.

— Can be used with any air device.

Valve Blocks

The building blocks of the Soft Touch Pneumatic Control Handles are the following three pneumatic valves, used alone or in combination:

— Single Signal Pilot
— Double Signal Pilot
— Rear Exhausting Three Port

Flexibility

The Soft Touch Pneumatic Control Handles share a common handle base with the G-Force Pendant Handle option. This allows the control block of the G-Force control handle to be easily integrated with the single pilot valve blocks of the Pneumatic handle product. This handle combination can be used to control end effector functions and the up/down motion of the G-Force on a single handle.